BioFlex,BF-3001 現貨BioFlex® Culture Plate，UniFlex® Cultur

BioFlex細胞培養板---現貨供應

Flexible-bottomed culture plate that works with the Flexcell^® FX-5000™ Tension Systemto provide a mechanical load regimen to cells in monolayer (see Fig. 1 below).

• 6-well culture plate with total growth surface area of 57.75 cm².
• Rubber membranes are optically clear for direct viewing of cells with an inverted or upright microscope.
• Covalently bound matrix surfaces: Amino, Collagen (Type I or IV), Elastin, Pronectin^® (RGD), and Laminin (YIGSR). Learn more in Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment.
• Available individually or by the case of 40* plates.

Applications of BioFlex^® Culture Plates

• Mechanical Load - use with the FX-5000™ Tension System to research the effects of equibiaxial tensile strain on cells in monolayer culture.
• Softer Substrate - provides a softer substrate for cell growth (when compared to standard plastic culture dishes) which better mimics in situ conditions for some cell types like trabecular meshwork cells (see Aga et al. Invest Ophthalmol Vis Sci 55(9):5497-509, 2014).
• Matrix Coated Surface - culture plate surfaces are coated with various matrix proteins, such as type I collagen and laminin, to better simulate in vivo conditions (see Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment).
• Traumatic Injury - can be used in studies looking at traumatic injury in astrocytes and neurons, where the injury is produced with a Cell Injury Controller that controls a burst of gas which deforms the BioFlex^® membrane creating large biaxial strains (see Ellis et al. J Neurotrauma 12 325–339, 1995; Ahmed et al. J Neurochem 74(5):1951-1960, 2000; Augustine et al. Neuroscience 274:1-10, 2014).

Read more about Applying Mechanical Load to Cells in Monolayer Culture
 

Figure 1: Equibiaxial strain application (with a FX-5000™ Tension System) to cells plated in the well of a BioFlex® culture plate.

五種不同包被的培養表面：Amino, Collagen (Type I or IV), Elastin, ProNectin (R GD), Laminin (YIGSR).

光學性能佳，自身熒光低。

當與圓柱形加載平臺共同使用時，可以對細胞進行均勻的徑向和圓周應力加載。

訂貨信息（請世聯博研公司）

產品編號  英文名稱 

BF-3001U      BioFlex Culture Plate — Untreated

BF-3001A      BioFlex Culture Plate — Amino
 
BF-3001C      BioFlex Culture Plate — Collagen Type I
 
BF-3001C(IV)  BioFlex Culture Plate — Collagen Type IV

BF-3001E      BioFlex Culture Plate — Elastin

BF-3001P      BioFlex Culture Plate — ProNectin

BF-3001L      BioFlex Culture Plate — Laminin 

單向應力細胞培養板UniFlex&tade; Culture Plates---現貨供應

Uniflex細胞培養板和FX-5000T應力加載系統配套使用，為單層細胞提供單軸向應力。
UniFlex細胞培養板和FX-5000T應力加載系統和TissueTrain細胞培養系統配套使用。
準確測量應力---負壓系統曲線，保證應力的準確性和可重復性。
單軸向應力作用于寬0.6英寸x0.952英寸(3.68 cm2)的長方形區域中。
單軸向應力變幅在+/-1.5%.
五種不同包被的培養表面：Amino, Collagen (Type I or IV) Elastin, ProNectin (RGD), Laminin (YIGSR) 
為獲得準確的單軸向應力，必須和弧矩形應力加載平臺配套使用。
訂貨信息（請世聯博研公司）
產品編號      英文名稱
UF-4001U      UniFlex Culture Plate — Untreated 
UF-4001A      UniFlex Culture Plate — Amino 
UF-4001C      UniFlex Culture Plate — Collagen Type I 
UF-4001C(IV)  UniFlex Culture Plate — Collagen Type IV 
UF-4001E      UniFlex Culture Plate — Elastin 
UF-4001P      UniFlex Culture Plate — ProNectin 
UF-4001L      UniFlex Culture Plate — Laminin 

Flexible-bottomed culture plate that works with the FX-5000™ Tension System to provide uniaxial strain to cells in monolayer culture. 

• Uniaxial strain applied to a strain field represented by a 0.6" wide x 0.952" (3.68 cm²) long centrally located rectangular region.
• Arctangle™ Loading Stations™ are required for correct application of uniaxial strain (see Fig. 1 below; additional information located in the Tech Report).
• Covalently bound matrix surfaces: Amino, Collagen (Type I or IV), Elastin, Pronectin^® (RGD), and Laminin (YIGSR). Learn more in Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment.
• Available individually or by the case of 40*.

Applications of UniFlex^® Culture Plates

• Mechanical Load - use with the FX-5000™ Tension System to research the effects of uniaxial tensile strain on cells in monolayer culture.
• Softer Substrate - provides a softer substrate for cell growth when compared to standard plastic culture dishes, which better mimics in situ conditions for some cell types like trabecular meshwork cells (see Aga et al. Invest Ophthalmol Vis Sci 55(9):5497-509, 2014).
• Matrix Coated Surface - culture plate surfaces are coated with various matrix proteins to better simulate in vivo conditions (see Tech Report 106: Matrix Bonded Growth Surfaces. Growing Cells in a More Natural Matrix Environment).
• Microgrooved Channels - plates have been modified to hold microgrooved channels molded with PDMS. Plates can then be mechanically loaded with the FX-5000™ Tension System, if desired (seeJones et al. J Biomech 38(8):1653-1664, 2005).

Read more about Applying Mechanical Load to Cells in Monolayer Culture
 

Figure 1: A) Arctangle® loading post. B) UniFlex® well. C) UniFlex® Culture Plate resting atopArctangle® Loading Station™.