請注意
1997年5月29日歐洲議會和理事會關于統一的壓力設備指令97/23/EC。
自1999年11月29日以來，各成員國的法律已經生效。自2002年5月29日起，液壓蓄能器可根據本指令單獨安裝在市場上。
以空運方式發貨通知。
由于法律規定，博世力士樂需要減輕液壓蓄能器的預充壓力，這些液壓蓄能器是在運輸之前通過空運運輸?shù)?。在這種情況下，客戶是可以重新填充的。
如果客戶不能進行重新填寫，請當?shù)夭┦懒κ繕贩?wù)合作伙伴。
自2001年11月起，采用膜片式蓄能器，包括1升的CE指令。然而，累加器不能被標記。——結構沒有用戶。每批貨都有1 539 929 064。
膜片式蓄能器大于1升。
行政長官指令自2001年11月起實施。累加器必須被標記。他們有操作說明和對每一個se- ries的符合性聲明。一致性聲明包括了交流累積器的技術數據。每批裝運的單據都附有單據。
Table of contents
Content Page
Features 1
Ordering code 2
Operating instructions and conformity declarations 3
Function, section, symbol 3
Technical data 4
Application, operating principle 5
Calculation 5 to 10
Unit dimensions 70 to 250 bar 11
Unit dimensions of standard types 70 to 250 bar 12 to 14 Unit dimensions of US standard types 15, 16
Unit dimensions of standard types 350 bar 17, 18
Accessories 19 to 21
Safety notes on hydraulic accumulators 22
Legal stipulations 22, 23
Safety equipment 23
Commissioning, maintenance 23, 24
Features
– Hydraulic accumulator according to Pressure Equipment Directive 97/23/EC
– Diaphragm material for different applications
Note
Pressure Equipment Directive 97/23/EC of the European Parlia- ment and the Council of 29th May 1997 on the harmonization
of the laws of the member states has been in force since 29th November, 1999. Since 29th May, 2002 hydraulic accumulators may exclusively be placed on the market in a accordance with this Directive.
Notice for orders with delivery via air freight
Due to legal regulations, Bosch Rexroth is required to relieve the pre-charge pressure in hydraulic accumulators that are shipped via air freight prior to shipping. In this case, the customer is re- sponsible for refilling.
If the customer is not able to perform the refilling, please contact the local Bosch Rexroth Service partner.
Diaphragm-type accumulators up to and including 1 liter The CE Directive has been implemented since November 2001. The accumulators must, however, not be CE-marked. User in- structions no. 1 539 929 064 accompany every shipping batch.
Diaphragm-type accumulators greater than 1 liter
The CE Directive has been implemented since November 2001. The accumulators must be CE-marked. They are shipped with operating instructions and a conformity declaration for each se- ries. The conformity declaration includes technical data of the ac- cumulators. The documents accompany each shipping batch.
Capacity Permissible max. | Compo- | Certification |
| operating pressure | nent series | Acceptance |
0.075 | 250 | 1X | BA |
0.16 | 250 | 1X | BA |
0.35 | 210 | 1X | BA |
0.5 160 | 1X BA |
| 250 | 2X | |
| 100 | 1X | |
0.7 | 180 | 1X | BA |
| 250 | 1X | |
| 350 | 2X | |
1.0 | 200 | 1X | BA |
| 140 | 1X | |
1.4 | 250 | 1X | CE |
| 350 | 2X | |
| 100 | 1X | |
2.0 | 250 | 1X | CE |
| 350 | 2X | |
| 70 | 1X | |
2.8 | 250 | 1X | CE |
| 350 | 1X | |
3.5 250 | 1X CE |
50 1x
組件系列
有1 *
進一步的細節
組件系列10到19 = 1X。
組件系列20到29 = 2X。
(未改變的安裝和連接尺寸)
預先充電的壓力
0到250條
10 bar = 10。
液壓油的連接尺寸1)
m14x1.5 = Z04
m18x1.5 = Z06
m22x1.5 = Z08
G 1/4 = G02
G 3/8 = G03
G 1/2 = G04
G 3/4 = G05
G 1 = G06
3/4 - 16 unf = U04。
1/16 - 12 unf = U06。
3/8 nptf螺紋= F02
1/2 - 14 nptf = F08。
安裝類型(油連接形式)
安裝腔=一個
采用六邊形= C的安裝腔。
螺柱以母螺紋= E結束。
學生結束= F
Stud結束M45x1.5與女性線程= E5。
特殊變體請求
以明文
如特殊變體
認證(驗收)CE =驗收。
97/23 / EC
英航=操作規程
連接面1 =鋼表面。
2 =鍍鋅鋼
坦克內部的表面。
1 =鋼
2 =鍍鋅鋼
箱材料
1 =鋼
隔膜材料
N = nbr
E =生態
I =信息檢索
F = fkm
形式的氣體連接
1 =標準變量，0 538 103 012。
2 =氣體閥，為0 538 103 011。
4 =不可重查，氣側焊接。
1)請求上的進一步連接尺寸。
